C2C Electronics - Particle Accelerator KIT - poistossa

C2C Electronics - Particle Accelerator PCB Set

This is a PCB set for building your own Particle Accelerator preamp. This is not a beginner project, so if you’ve never built a pedal before, then this isn’t for you.

I’ve tried to make this as affordable and as easy to assemble as possible, but this is a high-voltage circuit and requires special care in assembly, testing, and use. Conspiracy to Commit Electronics is not responsible for any damage or injury caused by improper handling, assembly, or use of this circuit.

Particle Accelerator Features:

• Based on the Alembic F-2B, which is in turn based on the preamp of the Fender Dual Showman.
• Works great for guitar or bass.
• Can be run clean or you can crank the gain and get a little dirt out of it.
• For a cleaner sound, use a lower gain tube like a 12AT7, 12AY7, or 12AU7 based on your taste.

Included in the PCB Set:

• “3PDT-TB” footswitch PCB
• “12AX7-LEFT” PCB for mounting the tube socket.

A pre-drilled enclosure can be purchased from Tayda Electronics, instructions included.

You can find the build document with the BOM, schematics, and enclosure drill guide here.

UralTone BOM UralTone BOM

Enclosure 1590BB (not included)

Tubes 12AX7 x 1 (not included)

Includes all the components from the UralTone BOM EXCEPT enclosure and tubes! 

Component list is copied from the manufacturer's BOM UralTone has not tested or built this kit. 

Technical support via the manufacturer. 

Please note: Enclosure and tubes should be ordered separately.